Products

        
      

The sintered AlNiCo is manufactured by powder metallurgical process, and could be sintered to produce smaller shapes.

 

ADVANTAGES: 
 
Good resistance to demagnetization: The max temperature is up to 550. The Curie temperature is up to 860.
 
Lower temperature coefficient: Temperature Coefficient of Br (%/°C): -0.016 ~ -0.02
 
Widely range of complex shapes and sizes.
 

APPICATION FIELDS:

Measuring instruments

Polarized relay

Motors

Sensors

Temperature and pressure controller

Meters

Mini speaker

Controller

Magnetic voltmeter/ammeter

Educational equipment

Speedometer

 


DETAILED INFORMATION:
 

The properties: It has slightly lower magnetic properties than Cast AlNiCo. Please kindly check the catalogue for detailed parameters in the top of the page.  


The size and tolerance:
 We could control the best tolerance within +/-0.025mm for routine magnets. If our customers have special request on the sizes and tolerance, we will try our best to meet their requirement. 

The surface treatment:
most of AlNiCo does not need surface treatment, because of the good corrosion resistance. 

The magnetization:
There are detailed description and sketch in the index ”services”, please kindly check it.
 

 AlNiCo has a low coercive force, and is easily demagnetized. Please handle them with care.

Magengine Co.,Ltd 京ICP备07003865
Address:Room 12B03,Building A,Guidu International Center,No.27 Nanbinhe Road,Xicheng District,Beijing,China
Telephone: +86 10 83993401,83993400,83993402 Fax: +86 10 8399 3403
Website:www.magengine.com
msn